Gramps 5.0 Wiki Manual - Entering and editing data: brief
This section is designed to give you the basic knowledge necessary to start putting your genealogical information into Gramps. It will explain how to enter people into the database and how to specify their family relationships. (A more detailed explanation will follow in the next chapter: Gramps 5.0 Wiki Manual - Entering and editing data: detailed.)
First, let us identify the types of information you can enter into your Gramps database. These include:
- Personal information about an individual (names, addresses, birth and death dates, etc.)
- Information about an individual's relationships (marriages, divorces, civil unions, etc.)
- Information about an individual's parents and children
- Sources that document your research
Keybindings (Keyboard Shortcuts)
In addition to interacting with Gramps through menu items and buttons, you can use its extensive set of "keybindings." For more information, see Appendix B: Keybindings reference.
Now let us take a quick look at how you can enter and edit these various types of information.
- 1 To add or edit a person
- 2 To specify a relationship
- 3 To specify parents
- 4 To specify children
- 5 Adding photos and other media objects
- 6 To edit events, citations/sources, places, and repositories
To add or edit a person
There are multiple ways to add a new person to the Family Tree (database). We will cover some of them as we proceed.
Add a new person
The simplest way to enter a person to add them from the People View. While you are in the People View, click the Toolbar + button.
The Edit Person dialog will be shown and you can enter any data you know about this person then select Ok to save the new person.
Edit an existing person
Alternate ways of adding or editing a person from the People View
You can also use the Menu Edit->Add... and other items available under Edit. Or you can right-click on the person and select Add... or Edit... from the context menu that pops up.
People can also be added to the database in the Relationships View, Edit Family dialog, and other places where it makes sense.
To specify a relationship
There are two primary ways to specify relationships between people:
- using the Relationships View. The Relationships View is usually used to build multiple relationships to a single person.
- using the Edit Family dialog from the Family List View. The Family List is usually used to build all the Relationships within a single family at a time.
Specifying a relationship using the Relationship View
To specify a new relationship to the Active Person, switch to the Relationships View and you will see this individual indicated as the "Active Person". Next to the Family label is a Add button (typically represented by a + sign).
Clicking the + button will display the Edit Family dialog with the Active Person set as either the father or the mother.
Now a question ?: Does the person who will form the relationship with the Active Person already exist in the database? If yes, click the Select button to the other person. You will then be able to browse through the list of people in the database to select the one you want. If not, click the + button. This will allow you to add a new person to the database and to specify the relationship this person has to the Active Person.
To search a person on dialog selector
Remember that you can get an entry on the list by typing the first letter on your keyboard. (see Finding records)
To edit an existing relationship from the Relationships View, click on the Edit button next to corresponding Family entry. If there is more than one relationship in the list, you can select the spouse or partner you want by clicking the corresponding Edit button next to the relationship.
Specifying a relationship using the Family List View
To specify a new relationship in the Family List View, click on the + button on the toolbar, and an empty Edit Family dialog will open. At this point, you can add people to the family.
To specify parents
You can specify Active Person's parents in the Relationship View (See Select Family - selector). A little care is required to prevent the creation of duplicate families. If you wish to add the Active Person to an already existing family, you should click the Select button. If the family including the parents does not already exist, you should click the + button.
If you click on the Select button, you are presented with the Select Family dialog. This will allow you to select the existing family, and then the Active Person will be added as a child to the family.
If you click on the + button, a new Edit Family dialog is presented with the Active Person listed a child of the new family. You can add the parents to the family by either adding new people as the parents or selecting existing people as the parents.
You can also specify the parents of a person in the Family List View. If the family already exists, click on the Toolbar Edit button and add the person as a child when the Edit Family dialog is displayed. If the family does not already exist, click the + button to create a new family, and add the appropriate parents and children.
If you create a new family and select parents that are already in an existing family, Gramps will issue a warning message. If you proceed by saving the new family, you will have a duplicate family.
To specify children
Adding children to a relationship is done through a similar procedure. From the Relationships View or the Family List View, select the existing family or create a new family. Children can be added by selecting the + button or Select button to the right of the child list.
Clicking the + button will display the Edit Person dialog, allowing you to enter a new person. Clicking on the Select button, will allow you to select an existing person from a list. By default, the child is added with the relationship type of birth to both parents.
If you wish to change the parent/child relationship from the default setting of Birth, from the Edit Family dialog select the child and click on the Edit. This will display the Edit Child Reference dialog.
If you wish to change the order of the children in the family, use the arrows or the drag and drop function on Family Editor.
Adding photos and other media objects
Please update or expand this section.
You can add photos and other media objects to individual people, events, sources, and places. You can also add images that might not be limited to a single person or event (for example, group family photos).
If you want to add an image to a single person, switch to the People View (mainwin-fig), select a person, and then click the Edit icon on the toolbar. This will bring up the Edit Person dialog (edit-pers-fig). Next, select the Gallery tab, and click the + button to call up the Select a media object dialog. Type a filename or browse to find the image file you want and then provide a title for that image. Keep adding images until you are done.
To add images related to a relationship (for example, a marriage), switch to the Family View (family-fig) and double-click on the Spouse box. This calls up the Marriage/Relationship editor dialog. Select the Gallery tab and click the + button to add an image.
To add images related to a source or a place, first switch to the Source View (sources-fig) or Place View (places-fig). Select the source or place you want and then either double-click on it or click the Edit icon on the toolbar. Select the Gallery tab and click the + button to add an image.
Finally, to add images that you want to include in the database, but hare are not limited to any particular person, relationship, source or place, switch to the Media View (media-fig). Then click the + icon on the toolbar to add an image. If you have already added any images to any individual galleries, you will also find them listed in the Media View.
To edit events, citations/sources, places, and repositories
Please update or expand this section.
To add an event, a citation/source, a place, or a repository to the database, switch to the appropriate Events View ( events-fig), Citations View, Sources View (sources-fig), Places View (places-fig), or Repositories View (repository-fig). Then click the + icon on the toolbar to add the corresponding object. Enter the information into the Event Editor ( Source Editor, Citation Editor, Place Editor , or Repository Editor ) dialog.
To edit information about events, sources, places, and repositories already present in the database, switch to the appropriate view, select an entry you would like to view/modify, and then click the Edit icon on the toolbar. Alternatively, you may double-click on the entry to edit it.
|Special copyright notice: All edits to this page need to be under two different copyright licenses:
These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [https://www.gramps-project.org/...]), not via internal links.