This section describes the different Graphical Reports available in GRAMPSGramps. 

The following graphical reports are currently available in GRAMPSGramps: 

Choose the output format: Open Document Text, PDF document, PostScript, Print..., or SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).

 [[Image:Ancestor_tree_tab.png|right|thumb|250px350px|Tree Options tab]]

This tab allows you to determine the {{man label|Main Father Display Format}} to be used for the report (see [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]])All fathers, grandfathers, etc. The {{man button|Center person}} of the report will always use this format.

The {{man label|Use Main/Secondary Mother Display Formats for:Format}} give these three options:to be used for all mothers, grandmothers, etc. will use this format.

# ''Everyone in The {} around the tree uses the Main Display format''# ''Mothers use the Main Display formatdeath information line states that this entire line will display ONLY when there is death information. See [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]] for more information, including how to include places and attributes, and Fathers use the Secondary''# ''Fathers use the Main Display format, names and dates and Mothers use the Secondary''places.

==== Secondary tab ===={{man label|Include Marriage box}} specifies to display an extra box between a father and mother that contains marriage information. {{man label|The Marriage Display Format}} (see [[Image:Ancestor_secondary_tabGramps_3.png3_Wiki_Manual_-_Reports_-_part_2|right|thumb|250px|Secondary tabSubstitution Values]]) specifies what will print in this box.

This ==== Size tab allows you to determine the {{man label|Secondary Display Format }}(see [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]]). This will only be used if specified on the display tab. This is most useful if you wish to have fathers or mothers display an extra marriage information or any other information that is shared between the couple.====

{{man label|Include Marriage information}} specifies to display an extra box between a father and mother that contains marriage information. {{man label|The Marriage Display Format}} (see [[Gramps_3Image:Ancestor_sizes_tab.3_Wiki_Manual_-_Reports_-_part_2png|Substitution Valuesright|thumb|250px|Sizes tab]]) specifies what will print in this box.

The first two options (where {{man label|Scale tree Resize page to fittree}} and {{man label|Resize will make the page larger or smaller to fit the tree}}) are better described in [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_4.2|Page size options]] with tips for making nicer reports.

And If both are selected, the options to display : happen in that order; scale the tree first, then the page.

* {{man labelThese two options are better described in [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_4.2|Report Title}}* {{man label|Print a Border}}* {{man label|Print Page numbers}}* {{man label|Include Blank pages}}Size options]] with tips for making nicer reports.

==== Note Include tab ====[[Image:Ancestor_note_tab.png|right|thumb|250px|Note tab]]This tab allows you to add a note to one of the corners of the report.

[[Image:Ancestor_include_tab.png|right|thumb|250px|Note tab]] This tab gives you the option to include other items on the report. {{man label|Report title}} allows you to choose a title for the report. * ''Do not print a title''* ''Include Report Title'' And this tab also includes check boxes for {{man label|Include a border}}, {{man label|Include page numbers}}, and {{man label|Include blank pages}}. This tab also allows you to {{man label|Include a note}} to one of the corners of the report. “$T” within the report note will display the day that the report was made. Regular date formatting (see [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]]) applies.

[[Image:Ancestor chart.png|thumb|250xleft|500x|Fig. 8.2 PDF Output ancestor tree]]

The Fig. 8.2 shows the final output result can be seen on the right side.

[[Image:Calendarreport1.png|right|thumb|250px350px|Fig. 8.3 Calendar Paper Options]]

[[Image:Calendarreport4.png|right|thumb|250px350px|Fig. 8.4 Calendar Document Options]]

** SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).

====Calendar Test Text Options====

* Text Area 2: Second line of text at bottom of calendar default value: ''Produced by GRAMPSGramps''

** SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).

 {{man button|Report for:}} option will select the center person for this report. The currently active home person will be the default person displayed.

 {{man label|Descendant Display Format}} gives you sets the opportunity to change the default settings display for all descendants in the displayed entries (see [[Display_formatting3_3|Substitution Values]])tree. The default is:

{d. $d}</pre> The {} around the death information line states that this entire line will display ONLY when there is death information. See [[Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]] for more information, including how to include places and attributes, and format names and dates and places. And the check box {{man label|Bold direct descendants }} can also make the report easier to read.

Every column width is defined by the widest box in the report. So if one box happens to be a lot wider than all of the others, a lot of space will be wasted. This option allows you to remove or abbreviate parts of the string that is not needed or can be cut down so the amount of space wasted is minimal.

==== Print tab ====[[Image:Ancestor_print_tabAncestor_include_tab.png|right|thumb|250px|Descendant Replace tab]]The first two options ({{man label|Scale tree to fit}} and one {{man label|Resize Page to Fit Tree size}}) are better described in [[Page_size3_3|Page size options]] with tips for making nicer reports.

And this tab also includes check boxes for Print to {{man label|Include a border}}, Print {{man label|Include page numbers}}, and {{man label|Include blank pages}}.

==== Note tab ====[[Image:Ancestor_note_tab.png|right|thumb|250px|Note tab]]This tab also allows you to add {{man label|Include a note }} to one of the corners of the report.

“$T” within the report will display the day that the report was made. Regular date formatting (see [[Display_formatting3_3Gramps_3.3_Wiki_Manual_-_Reports_-_part_2|Substitution Values]]) applies.

{{man note|Shared options with the [[#Descendant Tree|Descendant Tree report]]|This report only has two three differences from the 'Descendant Tree' report. The only differences are:# is this report runs off of a family instead of a person(differences on the tree tab)# More options for a report title(on the Include tab)# the final result

Choosing {{man label|Start with the parent(s) of the selected first}} may display two sets of parents (if the parents of both the father and mother are known). One set of parents for the father, and another set of parents for the mother of the family (ie grandparents of the children). As such, any siblings of the father will be shown with on the father fathers side and any siblings with the mother will be displayed with her. So the children of the center family will see their grandparents, parents, uncles and aunts and even cousins if there are any.

==== Print Include Tab ====The {{man label|Report Title}}: has these additional options:

Choose the output format: Open Document Text, PDF document, PostScript, Print..., or SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).

Document options: choose the output format: Open Document Text, PDF document, PostScript, Print..., or SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).

[[Image:Statistic1.png|right|thumb|250px350px|Fig. 8.13 Statistics chart options]] 

 [[Image:Statgraftaart.png|right|thumb|250px350px|Fig. 8.14 Results]] [[Image:Statistic2.png|right|thumb|250px350px|Fig. 8.15 Results]] 

The image (Fig. 8.15) shows the result of '''Age of first child''' for all women born between 1500 and 2008. For most (576) persons personal information was missing, for some birth information was missing, but for 33 women their first child was born at age 20. With the detailed iformation information further analysis can be done: calculate average, std. dev. etc.

Document options: choose the output format: Open Document Text, PDF document, PostScript, Print..., or SVG (Scalable Vector Graphics). A {{man label|check box}} is available were where you can indicate to open the made document with [http://www.documentfoundation.org/download/ LibreOffice] Word Processor or a Document Viewer (PDF file).