Fr:Manuel wiki pour Gramps 3.0 - Fenêtre principale

From Gramps
Revision as of 17:16, 29 March 2008 by Romjerome (talk | contribs)
Jump to: navigation, search
Gnome-important.png Special copyright notice: All edits to this page need to be under two different copyright licenses:

These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [https://www.gramps-project.org/...]), not via internal links.
Also, only use the known Typographical conventions


Introduction

When you open a database (either existing or new), the following window is displayed:

Fig. 2.1 GRAMPS Main Window

La fenêtre de GRAMPS contient les éléments suivants:

  • Barre de menu : elle est placée tout en haut de la fenêtre (juste à droite du titre de la fenêtre) et donne accès à toutes les fonctions de GRAMPS à travers ses menus.
  • Barre d'outils : elle est placée juste sous la barre de menu. Elle donne accès aux fonctions les plus utilisées de GRAMPS. Sa présentation peut être changée dans le menu Edition -> Préférences . Vous pouvez également la cacher entièrement en allant sous Affichage -> Barre d'outils .
  • Barre de progression : elle se trouve en bas, à gauche de la fenêtre principale de GRAMPS. Elle montre l'avancement des opérations longues comme le chargement ou l'écriture de grosses bases de données, l'importation ou l'exportation d'autres formats ou la génération de sites web, etc. Quand vous ne réalisez pas ce types d'opérations, la barre de progression n'est pas affichée.
  • Barre d'état : elle est placée à droite de la barre de progression, tout en bas de la fenêtre de GRAMPS. Elle informe sur le travail en cours avec GRAMPS et affiche une information contextuelle sur les items sélectionnés.
  • L'aire d'affichage : le plus grand espace dans la fenêtre de GRAMPS est la zone d'affichage. Elle montre une vue des données généalogiques, selon le type d'affichage en cours.

Les différentes vues

L'information généalogique est très large et peut être extrêmement détaillée. L'afficher est un challenge que GRAMPS accepte en divisant et organisant l'information à travers une série de vues. Chaque vue affiche une partie de l'information totale, sélectionnée selon une catégorie particulière. Cela deviendra plus clair quand nous aurons exploré les différentes vues, listées ci-dessous:

  • La vue Gramplet : affiche les différents gramplets, petits widgets pouvant aider à la recherche généalogique.
  • La vue Individus : affiche une liste d'individus dans l'arbre familial.
  • La vue Relations : affiche les relations entre la personne active et les autre individus. Ceci inclut les parent, conjoints, et enfants.
  • La vue Famille : affiche la liste de famille dans l'arbre familial
  • La vue Arbre généalogique : affiche un arbre des ascendants de la personne sélectionnée
  • La vue Evénements : affiche une liste d'événements dans l'arbre familal
  • La vue Sources : affiche une liste de sources dans l'arbre familal
  • La vue Lieux : affiche une liste de lieux dans l'arbre familal
  • La vue Media :affiche une liste d'objets média dans l'arbre familal
  • La vue Dépôts : affiche une liste de dépôts dans l'arbre familal
  • La vue Notes : affiche une liste de notes dans l'arbre familal

Avant de se lancer dans la description de chaque vue, commençons par expliquer comment changer de vue.

Changer de vue et de modes

Fig. 2.1. mode standard
Fig. 2.2. mode onglets

As mentioned above there are nine different Views. In addition, there are two different Viewing Modes. You can tell at a glance which Viewing Mode you are in: If you see icons listed vertically in a sidebar at the left of the window, you are in the Sidebar Viewing Mode. .

If instead you see a series of "notebook tabs" (labeled People, Relationships, Family List, Pedigree, Events, Sources, Places, Media and Repositories) that run horizontally across the window, then you are in the Tabbed Viewing Mode. You can switch from one Viewing Mode to another by selecting View ->Sidebar from the Sidebar menu item.

Pour changer de vue dans la barre latérale, cliquez sur l'icône de la vue que vous désirez.

Pour changer de vue en mode onglet, cliquez sur l'onglet désiré.

Vue Gramplets

Fig.2.z vue Gramplets

The Gramplets view shows a number of widgets, called Gramplets, that can help you in your research. Two Gramplets are shown on start-up (the Welcome and Top Surname Gramplets), but by right-clicking on the view, a popup comes up with the possibility of adding other Gramplets.

For more detailed information see Gramplets. Here we give an overview of the functionalities.

  • Age on Date Gramplet: This gramplet computes the ages for everyone in your Family Tree on a given date
  • Calendar Gramplet: Shows events on particular days and years
  • News Gramplet: Retrieves the News page from the GRAMPS wiki
  • Pedigree Gramplet: Shows a compressed Pedigree Chart of past direct ancestors. Also gives a breakdown by generation. Click the links to see matching entries
  • Python Gramplet: Shows a window with a Python Shell. This is especially handy as a Date calculator, or for a quick access to Python
  • Session Log Gramplet: Shows a log of entries accessed, edited, for deleted for this session.
  • Statistics Gramplet: Shows a window with summary statistics of the current Family Tree: number of individuals, males and females, number of families, media objects, etc.
  • Surname Cloud Gramplet: Shows a window with a cloud of the most common Surnames.
  • TODO Gramplet: In this window you can add yout TODO list, or any notes. Several TODO gramplets can be made to help organize your research
  • Top Surnames Gramplet: Shows your top 10 Surnames
  • Welcome Gramplet: A Welcome to GRAMPS window

People View

Fig. 2.3. Column Editor Dialog

The People View lists the people stored in the database. You'll note that people are grouped according to their family names. To the left of each family name is typically either an arrow or some other type of indicator. Clicking it once will reveal the entire list of people sharing that name. Clicking the indicator again will "roll up" the list and show only the family name.

By default, the People View, displays the several columns of information about each person. You can add or remove columns to and from the display by calling up the Column Editor dialog ( Edit ->Column Editor ) and checking or unchecking the boxes listed. You can also change the position of a column in People View by clicking and dragging it to a new position in the Editor. Once you have made the changes you want, click OK to exit the Editor and see your changes in the People View.

Gramps-notes.png
Column Editor

The Column Editor is available in all Views and works the same way in each.

Fig. 2.4. Filter Controls Displayed

Filtres

Les bases de données généalogiques peuvent contenir des informations sur de nombreux individus, familles, lieux, et objets. Comme les longues énumérations sont suceptibles d'être une longue liste difficile à traiter mentalement. GRAMPS vous propose deux moyens différents pour contrôler cette situation en vous permettant de filtrer une liste pour une gestion adaptée. Ces méthodes sont rechercher et filtrer. Rechercher cherchera le texte affiché dans une liste, alors que les filtres affichent les individus dont les données correspondent au critère du filtre.

Rechercher est une méthode simple mais rapide pour rechercher dans l'affichage des colonnes. Taper les caractères dans la boîte de recherche et cliquer sur le bouton Trouver affichera seulement les lignes où le texte est présent.

Alternativement, vous pouvez activer la barre de filtre, laquelle s'affichera à la droite de l'affichage. Quand la barre de filtre est affichée, la barre de recherche ne l'est plus. Le barre de filtre vous permet de construire un ensemble de règles de filtrage interactives pouvant être appliquées à l'affichage. Le filtre est basé sur les règles et les données, pas sur l'affichage à l'écran.

Tango-Dialog-information.png
Searching vs. Filtering

Searching only searches for exact text matches. If the date displayed is "Jan 1, 2000", a search of "1/1/2000" will fail, but a filter of "1/1/2000" will match.


Quand GRAMPS ouvre une base de données, aucun filtrage n'est actif. Dans la vue des individus, tout le monde est listé par défaut.

Vue relations

La vue relations affiche toutes les relations autour de la personne active (la personne sélectionnée). En particulier, cette vue montre ses parents, ses frères et soeurs, ses conjoints et ses enfants.

The Relationships View is designed to allow for quick navigation. You can quickly change the Active Person simply by clicking the name of any person listed on the page. Each name is actually a hypertext link, similar to a web page.

Fig. 2.5. Relationships View

La vue relations affiche ces différentes sections:

  • La personne active : en haut de l'écran, nom, id, naissance, et information de décès de la personne active sont affichés. Si une photo de l'individu est disponible, elle est affichée sur le côté droit. A côté du nom de la personne il y a un symbole indiquant le genre, et un bouton Éditer. Cliquer sur le bouton Éditervous permettra d'éditer toutes les informations de l'individu dans un dialogue d'édition de la personne.
  • Les parents : la section suivante, la section parents, affiche les familles dont la personne est l'enfant. Puisqu'il est possible pour une personne d'avoir plusieurs couple de parents, il est possible d'avoir plusieurs sections parents.

Vous pouvez contrôler le nombre d'information à afficher en utilisant le menu Affichage. Ce menu d'affichage vous permet de montrer ou de cacher les détails (naissance et information de décès) et de montrer ou de cacher les frères et soeurs. A côté de chaque individu listé il y a un bouton Edit, lequel vous permettra d'éditer tous les détails d'une personne particulière.

Vous pouvez ajouter un nouveau couple de parents soit en sélectionnant Ajouter des parents ou Partager des parents. Le bouton Ajouter des parents produira une nouvelle famille dont la personne active sera listée comme enfant. Le bouton Partager des parents vous permettra de choisir à partir d'une liste de familles existantes, puis d'ajouter la personne comme enfant de la famille.

Vous pouvez éditer des parents existants en sélectionnant le bouton Editer à côté des parents. Si vous sélectionnez Supprimer à côté du couple de parents, alors la personne active ne sera plus l'enfants des parents. Ce bouton ne supprime pas la relation des parents.

Gnome-important.png
Warning

If you are not careful, it is possible to create multiple families with the same parents. This is rarely what the user wants to do. If you attempt to add a new family that has the same parents as an existing family, GRAMPS will issue a warning dialog. If you get this dialog, you should probably Cancel the edit, and then use the Select button to select the existing family.

  • La famille : cette section est similaire à la section parents, laquelle affiche les familles où la personne active est un parent. Parce qu'il est possible d'avoir de multiples familles, il est possible d'avoir de multiples sections famille. Chaque section famille affiche le conjoint et les enfants.
Gramps-notes.png
Spouse

We use the term spouse for sake of simplicity. However, please note that spouse may in fact be a domestic partner, a partner in a civil union, or various other similar relationships between two people. Spouse relationships are not required to be only between a male and female.

Fig.2.x Relation reordering

You may add a family by selecting the Add Spouse in the toolbar. This will create a new family with the Active Person listed as a father or mother.

Sélectionner le bouton Editer à côté du conjoint vous permettra d'éditer la famille affichée. Cliquer sur le bouton Supprimer enlèvera la personne de la famille affichée.

Gnome-important.png
Remove a person

Removing a person from a family does not delete the family. The person is removed as the father or mother, and any other relationships in the family continue to exist.

Gramps-notes.png
Note

We use the terms father and mother for the sake of simplicity. Even if there are no children in a family, the father and mother terminology is still used. In the case of male/male or female/female relationships, the father and mother labels should be considered to be convenience labels.

Vous pouvez réorganiser les parents et les conjoints en sélectionnant Réorganiser. Cette option ne sera active que si plus d'un couple de parents ou plus d'un conjoint existe pour la personne active. Sélectionner ce bouton affichera un dialogue qui vous permettra de réorganiser les familles.

Vue Famille

Fig. 2.x. Family List View

La vue liste de famille affiche une liste de toutes les familles de la base de données. Depuis cette vue, vous pourrez ajouter, éditer, ou supprimer les familles. Par défaut GRAMPS affiche id, père, mère, et relations. Les enfants ne pouvant pas être affichés à l'écran dans cette vue.

Gnome-important.png
Remove button

Unlike the Relationships View, clicking the Remove button in this view will remove the family from the database. All people will remain, but all relationships between the people in the family will be removed.

Pedigree View

Pedrigree view

The Pedigree View displays a family tree of the Active Person's ancestors. The Pedigree View shows up to five generations, depending on the size of the window. Each person is indicated by a box labeled with his or her name, birth and death information, and optionally an image if available. Two lines branch from each box. The top one shows the person's father and the bottom one the mother. Solid lines represent birth relations, while dashed lines represent non-birth relations such as adoption, step-parenthood, guardianship, etc.

To the left of the Active Person is a left arrow button. If the Active Person has children, clicking this button expands a list of the Active Person's children. Selecting one of the children makes that child the Active Person.

children menu

The appearance of the children's names in the menu differentiates the dead ends of the tree from the continuing branches.

Children who have children themselves appear in the menu in the boldface and italic type, while children without children (dead ends) appear in a regular font. If the Active Person has only one child, no menu will be displayed (since there is only one choice) and the child will become the Active Person when the arrow button is clicked.

Deux flèches vers la droite sont affichées dans la partie droite de la fenêtre. Celle du haut prend comme personne active le père de la personne active. Celle du bas met comme nouvelle personne active la mère de la personne active. Comme précédemment, tout l'affichage change alors en conséquence.

contexte personnel

Right-clicking on any person's box in the Pedigree View will bring up the "context menu".

Among other useful items, the context menu has sub-menus listing Spouses , Siblings , Children , and Parents of that person.

"Greyed-out" sub-menus indicate the absence of the data in the appropriate category. Similar to the children menu above, Childrens' and Parents' menus distinguish continuing lines from dead ends.

New in version 2.2 is the inclusion of an Events View.

Events can be shared between multiple people and multiple families. The Events View lists the all the events recorded in the database.

Vue événements

The default view displays the Description , ID , Type , Date , Place and Cause of the event.

Fig. 2.x Events view
Gnome-important.png
Meaningful event description

Because events can be shared, you should take the extra time to give each event a unique and meaningful description. This will help you find the correct event if you decide to share events.

The list of Events can be sorted in the usual manner, by clicking on the column heading. Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog can be used to add, remove and rearrange the displayed columns.

Vue Sources

Fig.2.x vue Sources

La vue Sources liste les sources stockées dans la base de données.

These can include various documents (birth, death, and marriage certificates, etc.), books, films, journals, private diaries, - nearly anything that can provide genealogical evidence. GRAMPS gives you the option to provide a source for each event you record (births, deaths, marriages, etc.). The Sources View lists the Title , ID , and Author of the source, as well as any Publication information that may be associated with it.

The list of Sources can be sorted by clicking on a column heading.

Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog can be used to add, remove and rearrange the displayed columns.

Vue Lieux

Fig. 2.x.Places view

The Places View lists the geographical places in which the events of the database took place. These could be places of birth, death, and marriages of people, as well as their home, employment, education addresses, or any other conceivable reference to the geographical location. The Places View lists the places' Name , ID , Church Parish , City , County , State , and Country . All of these columns can be used for sorting by clicking on a column heading.

Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog may be used to add, remove and rearrange the displayed columns.

If a place has been highlighted, you may select the Google Maps button to attempt to display the place in a web browser.

Your default web browser should open, attempting to use either the longitude and latitude coordinates or the place name to display the location using the Google Maps web site.

This feature is limited, and may not always produce the results you desire.

Vue Media

Fig.2.x.Media view

The Media View is a list of Media Objects used in the database.

Media Objects are any files that relate somehow to the stored genealogical data.

Technically, any file can be stored as a Media Object.

Most frequently, these are images, audio files, animation files, etc. The list box on the bottom lists the Name , ID , Type , and Path of the Media Object.

The Column Editor dialog may be used to rearrange the displayed columns, which obey usual sorting rules. The top part of the GRAMPS window shows a preview (if available) and information about the Media Object.

Vue Dépôts

Fig.2.x.Repositories view

La version 2.2 a ajouté le support des dépôts.

A repository can be thought of as a collection of sources.

Each source in the database can reference a repository (such as a library) in which it belongs. The functionality of the Repositories View is similar to the other views.

Vue Notes

Fig.1.y vue Notes

La version 3.0 liste les notes. Une note est un texte brut, stockée comme les autres objets.

The functionality of the notes View is similar to the other views. The view lists all Notes stored in the Family Tree. With the Edit ->Column Editor you can change the displayed columns. The possibilities are Preview, ID, Type and Marker.

The Type can be (amongst others): Event Note, Adress Note,Source text, Place Note

Double-clicking on a Note in the list will bring up a window where you can edit the Note. You can change fonts, font color and backgroundcolor. A spellchecker is available for English and your local language.

Previous [[Gramps {{{3}}} Wiki Manual| Index]] Next