Open main menu

Gramps β

De:Installation

Revision as of 20:00, 27 July 2019 by DVC-Mwaw9784 (talk | contribs) (Ergänzung zu fehlender GEXIV2 eingefügt.)

Contents

Letzte veröffentlichte Version

Die zuletzt veröffentlichte Version ist Gramps 5.2.1. Es kann sein, dass sie noch nicht zur Installation für deine Umgebung zur Verfügung steht. Bitte besuche die Downloadseite für mehr Informationen.

Gramps aktualisieren

 
Warnung

Wenn du von einer älteren Version Gramps aktualisierst, solltest du vorher diesen Anweisungen folgen.

Wenn du von einer älteren Version Gramps aktualisierst, solltest du vorher folgende Schritte durchführen:

  1. Verwende deine alte Version von Gramps zum Sichern oder Export deines Stammbaums nach Gramps XML (Du findest Sicherung im Stammbaummenü der aktuellen Gramps Versionen. Sonst verwende Export in demselben Menü, aber deaktiviere die vertraulich Optionen im Exportassistenten, um alle Daten zu exportieren).
  2. Deinstalliere deine alte Version von Gramps.
  3. Installiere die neue Version von Gramps wie weiter unten beschrieben.
  4. Öffne deinen bestehenden Stammbaum.
  1. Normalerweise funktioniert öffnen und aktualisiert deine Daten, wenn benötigt. Wenn erfolgreich, speichere die Sicherung, die du erstellt hast, an einem sicheren Ort.
  2. In dem Fall, dass das Öffnen oder Aktualisieren deines bestehenden Stammbaums fehlschlägt, tue folgendes:
  1. Erstelle einen neuen Stammbaum.
  2. Importiere deine alten Gramps XML Daten in diesen Stammbaum.

Zusätzliche Software, von der Gramps profitiert

Gramps benötigt die folgenden Programme nicht zwingend, sie verbessern aber seine Funktionalität:

  • Rechtschreibprüfung: Die Installation von python-gnome2-extras und python-enchant stellt das gtkspell Modul und das enchant Modul zur Verfügung, welche die Rechtschreibprüfung in den Notizen ermöglichen.
  • Graphviz, Inkscape: Gramps kann damit nette Stammbäume und Graphen erstellen. Diese werden durch das Graphviz Paket erstellt, welches einen Code (dot) wie auch Programme zum erstellen von Grafen (dotty, zum Aufruf von der Kommandozeile) liefert. Dies gib dir als Forscher den größten Einfluss wie deine Grafen aussehen werden, aber es benötigt einen Lernprozess. Eine Alternative, ist einen grafischen Bericht zu erstellen, den Baum in eine svg Datei umzuwandeln, welche du dann öffnen/bearbeiten/aufbereiten kannst in z.B. Inkscape.
  • ttf-freefont: Nützliche Schriftarten, da sie UNICODE unterstützen und somit fast jedes Zeichen anzeigen können.
  • XdgUtils ist ein Satz Kommandozeilenwerkzeuge, die Anwendungen bei einer Reihe von Arbeitsplatzintegrationsaufgaben unterstützen. Ungefähr die Hälfte der Werkzeuge konzentrieren sich auf die Aufgaben, die üblicherweise bei der Installation einer Arbeitsplatzanwendung benötigt werden, und die andere Hälfte konzentriert sich auf die Integration in die Arbeitsplatzumgebung während die Anwendung ausgeführt wird. Auch wenn die Arbeitsplatzkomponenten deiner Anwendung auf eine Installationsroutine, Konfigurations- oder Verwaltungswerkzeug begrenzt sind, bieten dir Xdg-utils einfache Möglichkeiten, die Anwenderfreundlichkeit deiner Komponenten durch bessere Integration in die Anwenderumgebung zu verbessern.
  • pyexiv2 ist ein Modul, welches Gramps ermöglicht, in Bilder eingebundene Metadaten zu lesen und zu schreiben. Es wird im Metadatenbetrachter und den Bildmetadatengramplets verwendet.

Andere Pakete, die auch nützlich sein können:

  • 'desktop-file-utils: um eine Liste von Programmen zum Öffnen von Mediendateien bei einem Rechtsklick auf ein Bild zu sehen.

Linux

Automatischer Download und Installation von Gramps

Bevor du Gramps von dieser Seite herunterlädst, schaue, ob das Paketdepot deines Betriebssystems die aktuelle Version 5.2.1 enthält. Du kannst auch Gramps stabil auf Sourceforge besuchen und auf die Versionsnummer des obersten Pakets schauen.

Um die Verfügbarkeit insbesondere für dein Linux Betriebssystem zu überprüfen sind unten einige Möglichkeiten aufgelistet:

Linux Betriebssystem Kommandozeile
Debian basierte Systeme
(Ubuntu & Varianten, Mepis,...)
sudo apt-get install gramps
Gentoo (und Sabayon) sudo emerge gramps
Mandriva sudo urpmi gramps
Redhat based systems
(Fedora, CentOS...)
sudo yum install gramps
OpenSUSE sudo zypper install gramps

Manueller Download und Installation von Gramps

Wenn dein Linux Betriebssystem Repository nicht die aktuelle Version enthält, kann es sein, das du sie von hier herunter laden kannst. Einige hilfreiche Anwender von Gramps haben Pakete für verschiedene Systeme erstellt. Wenn du Glück hast, findest du dein System weiter nachstehend. Wenn es fehlt, kannst du die Entwickler Mailingliste für Vorschläge kontaktieren.

Ubuntu und Derivate

Depot Pakete für Ubuntu und Derivate (Kubuntu, Mephis, LinuxMint, ...): sind verfügbar unter Gramps Download Seite. Siehe Ältere Dateien für Archive.

Debian

Debian: die letzte Version sollte sich im unstable Depot befinden (Sid Gramps) und kann von deinem Paketmanager aktualisiert werden. Das testing Depot wird 10 Tage später aktualisiert (außer kurz vor einer stabilen Version), siehe Testing Gramps. Veröffentlichte Versionen von Debian ("etch" und "lenny") enthalten ältere Versionen von Gramps, siehe Liste auf Versionen von Gramps in Debian.

SuSE

SuSE: Richard Bos hat die Gramps Version für OpenSuse zur Verfügung gestellt. Das Repository für OpenSUSE 11.1 ist verfügbar unter [1] oder [2]. Beachte zum Zeitpunkt des Schreibens ist dieses Repository nicht das selbe wie "Education" aus der Repositoryliste und muss manuell als URL hinzugefügt werden. Das Repository für 11.0 ist [3] und für 10.3 [4]. Für frühere Versionen von OpenSUSE (10.2) siehe den Forumseintrag über erfüllen von Gramps Abhängigkeiten für SuSE mit rbos und SMART. Es gibt noch eine weitere Möglichkeit verwende den openSUSE BuildService.

Mandriva

Mandriva: Neuere Versionen werden manchmal zurück portiert. Um zurück portierte Software zu installieren, musst du das backports Repository aktivieren (stelle sicher, das du die Anweisungen auf dem Mandriva Wiki verstehst). Wenn die neueste Version nicht im backports Repository vorhanden ist, kannst du es im contrib Repository versuchen.

Fedora

Fedora: Für Fedora Core siehe auf der Gramps download Seite nach einem Paket mit fc und der Endung .rpm. Die Alternative zur Installation aus den Quellen, ist das Erstellen eines Pakets (englisch) von einer rpm spec Datei oder ein Binary aus fedora testing zu installieren.

Slackware

Slackware 13.0: Gramps 3.2.5 ist verfügbar über LinuxPackages.

Verschiedene GNU/Linux Distributionen

Verschiedene GNU/Linux Distributionen haben andere bevorzugte Wege Pakete für Gramps herunter zu laden und zu installieren. Bitte lies vor dem Herunterladen die Installationsanweisungen für deine Distribution.

In allen anderen Fällen musst du die Quellpakete herunterladen (die Datei mit der Endung '.tar.gz') und Gramps manuell installieren. Siehe den Abschnitt installieren aus der Quelle für Details.

Gnome und KDE

Du kannst Gramps sowohl in GNOME als auch KDE verwenden, es passt nur besser in GNOME, da es in KDE ein paar wenige Probleme mit GTK gibt. Genauere Informationen über die KDE-Probleme...

Gramps auf Handhelds

Gramps läuft hervorragend auf einigen Handhelds. Anwender waren erfolgreich bei der Verwendung von Gramps auf:

Live CD

Wenn du an Gramps interessiert bist, aber Angst hast oder unfähig bist es zu installieren (fremder PC, Windows, kein Internet zu Hause, Firmenlaptop) dann probiere unsere Linux Genealogie Live-CD. Sie läuft ohne Installation auf die Festplatte und enthält eine Reihe von quelloffenen, kostenlosen Genealogieprogrammen. Du kannst dann jederzeit, wenn du möchtest, Ubuntu 10.10 und Gramps von der CD installieren.

Windows, FreeBSD, MacOs, Solaris

Windows

Es gibt drei verschiedene Möglichkeiten, Gramps unter Windows zu Installieren/verwenden. Die Methode, die du wählst, hängt von deinen Anforderungen und wie viel Arbeit du in die Einrichtung deines Systems strecken willst ab. In der Reihenfolge der Schwierigkeit:

  • Gramps All-in-one installer (AIO) - Obwohl noch in der Entwicklung, gibt es mit dem AIO installer die wenigsten Probleme beim Einstieg. Siehe Alles in einem Softwarepaket für Windows für mehr Informationen.
  • Gramps Portable - Ermöglicht dir das Starten von Gramps von einem portablen Laufwerk und kann auf der lokalen Festplatte installiert werden. Siehe PortableApps.com Gramps Portable für mehr Informationen.
  • Gramps installer (minimal) - Stabiles Installationsprogramm, aber du musst alle Abhängigkeiten von Gramps vor der Installation von Gramps installieren. Siehe zuerst Windowsabhängigkeiten installieren.

Mehr Informationen über jede dieser Installationsmethoden gibt es auf der Download Seite.

  • Weitere Informationen für Windowsanwender befinden sich auf der Seite Gramps und Windows.

Installation von der Quelle

Glücklicherweise haben ein paar Leute hierfür einen Windows installer angefertigt. Bis jetzt liegen keine Berichte über schwerwiegende Unterschiede zwischen den offiziellen Builds von Gramps und dem Windows-Installer vor. Daher sieht die Zukunft hoffnungsvoll aus. Aber bitte verwende ihn auf eigenes Risiko.

Mac OS X

Eine ready-to-run Anwendung für Mac OS X für Intel und PPC Apple Rechner ist seit September 2009 verfügbar. Es ist sehr ratsam, die Daten vor der Verwendung des Programms sorgfältig zu sichern (besonders, wenn du von einer früheren Gramps Version aktualisierst).

Bitte lies die Installationsanleitung unter Mac OS X:Application package bevor du das Programm verwendest.

Free/OpenBSD und Solaris

Für FreeBSD und Solaris existieren unterhalb experimentelle Anleitungen zur Installation.

  • Für FreeBSD verwende die #3228.
  • Für OpenBSD verwende gramps port
  • Die Installation unter BSD ist ähnlich wie die unter Linux, abgesehen von evtl. anderen Paketnamen. Weitere Informationen gibt es auf der BSD Seite.
  • Gramps wurde erfolgreich vom Quellcode installiert auf Solaris 10 (SPARC) und OpenSolaris X86 (2008.05). Bitte schau auf die Solaris Seite für Schritt für Schritt Anleitung.

Installation von den Quellen

Gramps 3.4.x ist die aktuelle Hauptversion und ist für einige Distributionen in Paketform verfügbar.

Gramps 4.x ist eine neue Version, die andere Anforderungen besitzt. Installation dieser Version ist hier beschrieben.

Gramps 3.4.x

Allgemeine Anforderungen

Gramps 5.2.1 benötigt python 2.6 oder höher, pygtk 2.16 oder höher und librsvg2

Benötigte Linux Pakete

Debian /Ubuntu Fedora /Redhat Comment
python python Benötigt (Version 2.6 oder höher)
pygtk2 pygtk2 Benötigt (Version 2.16 oder höher)
xdg-utils xdg-utils Benötigt für Gramps-3.1.x oder höher
BSDDB BSDDB Aktuelle Datenbank
rcs rcs Empfohlen für den Betrieb
python-gnome2-extras gnome-python2-gtkspell Empfohlen für den Betrieb (Rechtschreibprüfung)
librsvg2-common librsvg2 Erforderlich für die Erstellung
libglib2.0-dev Erforderlich für die Erstellung
librsvg2-devel Erforderlich für die Erstellung
intltool intltool Erforderlich für die Erstellung
gcc make gettext Erforderlich für die Erstellung
WebKit-gtk pywebkitgtk Benötigt für HTML
goocanvas pygoocanvas Benötigt für HTML
graphviz graphviz-python Benötigt für einige Berichte und Ansichten
Django Benötigt für http://gramps-connect.org Gramps-Connect
python-pyexiv2 pyexiv2 Benötigt für Metadata Viewer und Image Metadata gramplets
libosmgpsmap-dev python-osmgpsmap osm-gps-map Benötigt für die Geografieansichten
gtk2-engines-pixbuf Behebt das Prooblem 'Unable to locate theme engine in module_path: "pixmap"'

Unter Redhat/Fedora kannst du alles oben aufgeführte installieren mit:

sudo yum install python pygtk2 xdg-utils rcs gnome-python2-gtkspell librsvg2 \
 librsvg2-devel gnome-common intltool gnome-doc-utils gcc make gettext WebKit-gtk \
 pywebkitgtk goocanvas pygoocanvas graphviz graphviz-python Django

Quellen herunterladen

Es gibt zwei Wege an den Quellcode zu gelangen: download a stable version source, or checkout the source from svn. Jetzt ist es Zeit die INSTALL und README Datei zu lesen, die dem Code beigefügt sind. Sie enthalten die neuesten Informationen. Details zu jeder download Methode:

1. Download einer stabilen Version

  • Die letzten stabile Version von Gramps findest du im SourceForge Datei Bereich. Z.B.:gramps-5.2.1.tar.gz. Entpacke diese Datei in ein Verzeichnis:
  tar xzvf gramps-zzz.tar.gz

wechsele in dieses Verzeichnis:

  cd gramps-zzz

  • Wenn du an der letzten Entwicklerversion interessiert bist, versuche es mit SVN (Kurzanleitung SVN. Die SVN-Version von Gramps ist potenziell gefährlich, da sie nicht getestet wurde. Sie kann zu Abstürzen und Datenverlusten führen. Bitte verwende sie mit Vorsicht- und nur mit einer Kopie deiner Daten!

2. Herunterladen von SVN

Du kannst eine Zweigversion (ähnlich wie oben) holen oder die letzte allerneuste Version über SVN, wie etwa:

 svn co https://svn.code.sf.net/p/gramps/code/tags/gramps-3.4.4/ gramps

für die letzte Entwickler Version siehe Mit Gramps Trunk beginnen.

Gramps aktualisieren

Wenn du eine ältere Version von Gramps aus den Quellen installiert hast, musst du dich entscheiden, was du mit ihr machen willst, bevor du eine neuere Version installierst. Wenn du die alte Version behalten willst, stelle sicher, das du die Anweisungen in der INSTALL Datei in Bezug auf die Verwendung der --prefix Option liest, die festlegt, wo die neue Version installiert wird.

Should you just want to do a straightforward replacement instead, make sure that you remove the older version before you install the new version. Do not install over the top of the old version. As new versions of Gramps are developed, some functionality is occasionally rewritten in different ways. If you install over the top of an existing installation you run the risk that the old code left behind from the old version may be used instead of the new, sometimes with unintended consequences. If you installed from source, the best way of removing the old version is to run

als root von dort wo du die alte Version installiert hast. Verwende den Paketmanager deiner Distribution zur Deinstallation falls deine alte Version als Paket installiert wurde.

Beachte du solltest die alte Gramps Version verwenden um Sicherungskopien im Gramps-XML Format zu erstellen, bevor du die alte Version entfernst.

Unter Linux erstellen

Gramps bietet ein Skript, dass den Code zur Installation vorbereitet und das Standard configure-Programm aufruft:

  ./autogen.sh # als normaler Anwender

Dieses Skript wird alle fehlenden Pakete bemängeln. Installiere diese (siehe INSTALL-Datei). Das bauen von den Quellen erfordert normalerweise, dass die Entwicklungsversionen der Pakete installiert sind (paketxy-devel). Wenn du möchtest kannst du einen prefix-Pfad für GRAMPs in der autogen.sh setzen, lies hier zu die INSTALL-Datei. Der Standard-Installationsordner ist /usr/local.

Wenn autogen.sh erfolgreich gelaufen ist, kann die typische make-Prozedur beginnen:

  make  # als normaler Anwender

dann

  make install  # als root

Eine lokale Installation ohne root-Rechte ist möglich, Anweisungen (in Englisch) sind in der INSTALL Datei enthalten, am wichtigsten ist es muss ein --prefix= und ein --with-mime-dir= Argument in autogen.sh hinzugefügt werden.

Mac OS X:Erstellen aus der Quelle

Es gibt mehrere verschiedene Wege Gramps unter Mac OS X aus der Quelle zu erstellen. Einen Überblick über das Erstellen aus der Quelle findest du unter Mac OS X:Build from source.

Macports und fink Versionen von Gramps wurden verwendet.

Die neueste Version von MacPorts Gramps ist 5.1.6. Die letzte offizielle instabile fink Version ist 3.0.4 für Mac OS X 10.5 auf PPC und Intel. Es gibt aktuell keine offizielle stabile fink Version von Gramps. (Stand Februar 2012)

Anweisungen zur Erstellung von einer vor-kompilierten Binär Version (Mac OX X Anwendungspaket) findest du unter Mac OS X:Build from source:Application package. Einige Diskussionen über frühere Versuche finden sich unter Mac OS X:Build from source:gtk-osx mit Fehlerberichten auf Mac OS X:Build from source:gtk-osx:bugs

Einen älteren Ansatz zum erstellen findest du unter Mac OS X:Build from source:Native OS X.

Gramps 4.x

General requirements

Gramps 4.0 requires python 2.7 or python 3.2 or greater. At the moment, python 2.7 is still the most stable way to use Gramps! Also needed are GTK 3.0 or greater, pygobject 3.3.2 or greater, cairo, pango, pangocairo with introspection bindings (the gi packages), librsvg2 (svg icon view), xdg-utils. Furthermore, bsddb3 is required for Python 3.2 (not python 2.7).

Full install walkthrough Ubuntu derivatives

Following walkthrough was done on a clean install of Kubuntu 13.04 which did have the GTK applications firefox, inkscape and gimp installed. Equal steps should be done on other platforms.

sudo apt-get install subversion
svn co https://svn.code.sf.net/p/gramps/code/branches/maintenance/gramps40 gramps40
cd gramps40
sudo apt-get install intltool
python setup.py build
sudo apt-get install python-gobject python-gi python-cairo python-gi-cairo
sudo apt-get install gir1.2-freedesktop gir1.2-pango
sudo apt-get install gir1.2-gtk

If you now run

python Gramps.py -v

you should see all required packages are found. You can now start Gramps locally with the command

python Gramps.py 

To install optional components, do the following:

sudo apt-get install python-pyicu graphviz rcs gir1.2-webkit-3

This gives all the easy optional functionality in Gramps. The rest is not yet present in Ubuntu 13.04, so if you want them, you need to compile them

spell checking Remove first present version, check that this command does not remove programs you use!

  sudo apt-get remove libgtkspell-3-0 python-gtkspellcheck

Now we obtain the code to build this package

 sudo apt-get install mercurial
 hg clone http://hg.code.sf.net/p/gtkspell/code gtkspell-code
 cd gtkspell-code
 sudo apt-get install build-essential sudo apt-get install libgirepository1.0-dev
 sudo apt-get install valac libgtk-3-dev
 aclocal ; autoheader; automake ; autoconf
 ./autogen.sh
 make
 sudo make install
 sudo cp /usr/local/lib/girepository-1.0/GtkSpell-3.0.typelib /usr/lib/girepository-1.0/
 sudo cp /usr/local/lib/libgtkspell3-3.* /usr/lib/

osmgpsmap The geography view needs patches which are not included yet in the official version.

 sudo apt-get install git
 git clone git://github.com/nzjrs/osm-gps-map.git
 cd osm-gps-map
 sudo apt-get install libsoup2.4-dev gnome-common gtk-doc-tools
 ./autogen.sh --prefix /usr
 make
 sudo make install
 

gexiv2 Minimally version 0.5 is needed, but only 0.4 is available in 13.04. So remove 0.4 if present, and we add 0.5 or later ourselves. Obtain it from [5], I downloaded 0.6.1, and extracted it in directory libgexiv2-0.6.1. To install this

 cd libgexiv2-0.6.1
 sudo apt-get install exiv2 libexiv2-dev
 ./configure --enable-introspection --prefix=/usr
  make
  sudo make install

Wenn beim Start von Gramps eine "gexiv2" Fehlermeldung angezeigt wird, dann kann der Fehler mit der Nachinstallation von `gexiv2` behoben werden.

 


run Gramps You can now use gramps from the source directory with

 python Gramps.py

You could install Gramps, but you better wait for a packages distributed from [6] and install those via your package manager

look and feel Normally, Gramps does not look that nicely when not used on Gnome desktop. To remedy this, install a theme switcher. You can edit configuration files if you don't like to install these dependencies, see eg [7]

sudo apt-get install gnome-tweak-tool

You can search on gtk 3 themes in your package manager and install one that you like. For example, install clearlooks:

sudo apt-get install clearlooks-phenix-theme

then use the gnome-tweak-tool to switch to that. For KDE you need to go also to Settings->Appearance->GTK and set the GTK 3 theme there to the one you installed.

Full install walkthrough Windows

On windows, you can install virtualbox and then install K/X/Ubuntu as indicated above, which will give you linux in windows.

The native windows support for Gramps 4.0 is being worked on. You find the current walkthrough on the dedicated page

Linux Paket Anforderungen

Benötigt

Debian /Ubuntu Fedora /Redhat Comment
python python Benötigt (Version 2.7 oder neuer)
python-gtk2 pygtk2 Benötigt (Version 2.? oder neuer)
python-cairo python-gi-cairo ? Required
gir1.2-pango-1.0 ? Required
gir1.2-gtk ? Required is GTK 3.6+
BSDDB BSDDB Current backend, python3-bsddb3 for python 3!
xdg-utils xdg-utils Benötigt für Gramps-3.1.x oder neuer
python-pyicu ? Required for correct sorting
libgtkspell-3-0 python-gtkspell ? Required spell checking

Zum Erstellen benötigt

Debian /Ubuntu Fedora /Redhat Comment
librsvg2-common librsvg2 Zum Erstellen benötigt
python-dev libglib2.0-dev glib2-devel Zum Erstellen benötigt
python-gobject-dev libgirepository1.0-dev ?
libcairo2-dev python-cairo-dev ?
librsvg2-devel Zum Erstellen benötigt
intltool intltool Zum Erstellen benötigt
gcc make gettext Required for building

Dringend empfohlen

Debian /Ubuntu Fedora /Redhat Comment
osmgsmap
graphviz graphviz graphviz-python Für einige Berichte und Ansichten benötigt
python-pygoocanvas gir1.2-goocanvas-2.0-9 ?
python-pyexiv2 ? exiv data on pictures

Optional

Debian /Ubuntu Fedora /Redhat Comment
python-gtkspell gnome-python2-gtkspell Suggested for running (spell check). Included in the python-gnome2-extras package in older Debian distributions.
rcs rcs Suggested for running
python-webkit python-gtkmozembed WebKitgtk pywebkitgtk Required for the HTML view
python-pygoocanvas gir1.2-goocanvas-2.0-9 goocanvas pygoocanvas Required for Graph View
Django Benötigt für http://gramps-connect.org Gramps-Connect
python-pyexiv2 pyexiv2 Required for the Metadata Viewer and Edit Exif Metadata gramplets
libosmgpsmap-dev python-osmgpsmap osm-gps-map Für die Geografieansichten benötigt
gtk2-engines-pixbuf Solves issue with 'Unable to locate theme engine in module_path: "pixmap"'

Unter Redhat/Fedora kannst du alles oben aufgeführte mit folgendem Befehl installieren:

sudo yum install python pygtk2 xdg-utils rcs gnome-python2-gtkspell librsvg2 \
  librsvg2-devel intltool gnome-doc-utils gcc automake autoconf autogen \
gettext WebKitgtk pywebkitgtk goocanvas pygoocanvas graphviz graphviz-python \ Django pyexiv2 inkscape ImageMagick

Obtaining the source

There are two ways to get the source code: download a stable version source, or checkout the source from svn. Please, now is the time to read the INSTALL and README files accompanying the code. They come with the most recent information. Details on each download method:

1. Download a stable version

  • The latest stable version of Gramps can be downloaded from the Gramps SourceForge file area. Eg: gramps-5.2.1.tar.gz. Extract this file into a directory:

  tar xzvf gramps-zzz.tar.gz

and then go into this directory:

  cd gramps-zzz

  • If you are interested in testing out the very latest development versions of Gramps, they can be obtained from SVN, see Brief introduction to SVN. The SVN versions of Gramps are potentially very dangerous as they have not been extensively tested - especially the "trunk" version which contains features that may still be partly implemented. Be aware that they may be prone to crashing and cause extensive data loss. Please use with extreme caution - and only ever on a copy of your data!

2. Download from SVN

You can get a branch version (similar as above) or the latest bleeding-edge version through SVN. You can download a specific release via a tag, or you can download the latest development. First, you need subversion installed, eg on Debian based linux:

sudo apt-get install subversion

Then, download a tagged version:

svn co https://svn.code.sf.net/p/gramps/code/tags/gramps-4.0.0/ gramps400

or latest development:

svn co https://svn.code.sf.net/p/gramps/code/branches/maintenance/gramps40 gramps40


More info can be found in Getting started with Gramps Trunk.

Upgrading Gramps

If you have an older version of the Gramps source code installed you need to make a decision what you want to do with it before installing a later version. If you wish to keep the old version, make sure that you read the instructions in the INSTALL file regarding the use of the --prefix option to specify where the new version gets installed.

Should you just want to do a straightforward replacement instead, make sure that you remove the older version before you install the new version. Do not install over the top of the old version. As new versions of Gramps are developed, some functionality is occasionally rewritten in different ways. If you install over the top of an existing installation you run the risk that the old code left behind from the old version may be used instead of the new, sometimes with unintended consequences. If you installed from source, the best way of removing the old version is to run

 make uninstall

as root from where you installed the old version. Use your distribution's package manager to uninstall if your old version was installed as a package.

Note that you should use your old Gramps version to export backup copies to GRAMPS XML before removing the old version.

Local installation without root privileges is possible, instructions are available on the INSTALL file, most importantly one needs to supply a --prefix= and a --with-mime-dir= argument to autogen.sh.

Siehe auch